After
BeforeLocal Proof
Recent Garage Door Work in Perth
A look at recent repairs, installations, and motor upgrades completed by our technicians across Perth's suburbs.
These photos are a sample of our recent jobs — as more job photos come through from our technicians, we'll keep adding them here so you can see exactly the kind of work to expect.
Real Jobs
From Broken to Fixed — Drag to Compare
After
BeforeThe same door, the same spot: a snapped torsion spring, then the new spring fitted and re-tensioned.
Recent Work
Category
Showing 12 of 40 jobs
AfterBefore
After
BeforeThe old opener had stopped responding; the rail, header bracket and springs were checked before the new unit went on, so the motor is not doing the springs' job.
Roller DoorsThe old guide had rusted through at the base. A new galvanised track on the pier gives the curtain a straight run and stops it snagging.
After
BeforePanels buckled by a vehicle impact. The bent panels were straightened and re-hinged so the door closes flat and seals against the floor again.
After
BeforeThe door would not travel up or down. With the springs also replaced on this visit, the new motor lifts a balanced door instead of dragging a heavy one.
After
BeforeOne cable had snapped and the door dropped on that side. Both cables and both bottom brackets were replaced so the door lifts level.
Roller DoorsA single roller door after service: curtain running straight in the guides, no scraping on either side.
After
BeforeThe original opener had stopped working. The new unit uses the existing rail position, with the limits and force set for this door.
After
BeforeThe door had jumped its tracks and was hanging out of the opening. Rollers were re-seated, the track re-aligned and the cables re-tensioned before it was run again.
After
BeforeBoth springs replaced on the same shaft. The door was balanced by hand before the motor was reconnected.
CommercialA commercial opening measured for a new door. Width, height and side room are taken at several points, because sheds are rarely square.
After
BeforePanels had dropped off the horizontal track. The door was re-tracked, worn rollers replaced and the opener limits reset.
Want a Similar Result?
Describe the door and what you're after, and a fair, itemised quote comes back fast.