Who makes the Capital 1100N and 1500N openers?

Capital Garage Doors, a Perth manufacturer and installer that supplies its own belt-drive openers alongside the doors it fits. Their own site carries the full product information for the range, and it is linked from the brand plate at the top of this page.

Will you service a Capital opener even though you did not fit it?

Yes. We service and repair every opener brand that lands in a Perth garage, whoever supplied or installed it. A Capital unit is an ordinary belt-drive opener to work on, and the parts that wear on it are the same ones that wear on any belt drive.

My Capital opener's belt is slipping. Is that serious?

Not usually, but it is worth acting on. A belt that slips is either out of tension or wearing, and both are straightforward to put right. The thing worth checking at the same time is the door itself — a belt that keeps slipping is often reporting a door that has become heavier than the drive was set for.

Can you re-pair the phone app to my opener?

Yes. App pairing commonly drops after a router change, a new phone or a firmware update, and re-connecting it is part of an ordinary visit. If the model does not support the app in the way you are expecting, we will tell you rather than sell you an accessory that will not help.

Should I match the opener brand to my door brand?

No — doors and openers are rarely the same make anyway. What matters is that the unit is rated for your door's weight and type. An opener that is correctly rated and running on a balanced door will outlast a more expensive one that is fighting the door every cycle.

Openers by make · Perth

Capital Garage Door Motors and Openers in Perth

The 1100N and 1500N belt-drive openers from Perth manufacturer Capital Garage Doors, serviced and repaired by us like every other make on a metro garage.

Call 0422 828 800 Request Quote

Perth manufacturer
1100N & 1500N
Remotes coded on site
All Perth suburbs

Capital Garage Doors

Origin: Perth, WA
Known for: Capital 1100N & 1500N openers
Drive: Belt, with app control
Door types: Sectional & roller
What we do: Service, repair & replace

We repair these openers in PerthMaker’s website

Capital garage door openers — the 1100N and 1500N belt-drive units made by Perth manufacturer Capital Garage Doors — are serviced and repaired across the metro by our technicians. They are ordinary belt-drive openers to work on: limits, remotes, capacitors and gears cover most faults, and we check the door's balance before deciding the motor is at fault.

Not a Capital Garage Doors? The full list of motor makes we work on around Perth covers the rest. Product details are on Capital Garage Doors’s own website.

One More Perth Opener, and How We Treat It

Capital Garage Doors is a Perth manufacturer and installer that supplies its own belt-drive openers, the 1100N and the 1500N, with the doors it fits. If one is on your garage, it almost certainly arrived with the door rather than being chosen separately — which is true of most manufacturer-supplied openers in this city.

We list it here for the same reason we list every other make: we work on what we find. There is nothing unusual about a Capital opener mechanically. It is a belt drive with soft start and stop, app control and an auto-reverse safety, and the parts that wear on it are the parts that wear on any belt-drive unit.

If you want the manufacturer's own information on the range, it is worth going to the source — their site is linked from the plate at the top of this page. What we can add is the local service side: what usually goes wrong, what it costs to put right, and whether the opener or the door underneath it is actually the problem.

Jobs we take on

Work we do on Capital Garage Doors gear

Capital opener repairs

Limits, belts, gears, capacitors, boards and wiring on the 1100N and 1500N units.

Details

Remotes & app pairing

Remotes coded on site, lost ones cleared from the memory, wall buttons and phone control re-paired.

Details

Safety sensor repair

The beam that makes a door reverse before it closes, realigned or replaced and then properly tested.

Details

Door balance & springs

The thing that decides how long any belt drive lasts — springs re-tensioned so the motor is not lifting the door.

Details

Models

Which Capital Garage Doors have you got?

Match the name on your unit's sticker to one of these cards.

Capital 1100N

Sectional opener

Belt drive · app control

The lighter of the two belt-drive units, on single and standard double doors.

Capital 1500N

Sectional opener

Belt drive · app control

The heavier unit, for larger or insulated doors that need more pull.

Faults

Faults we find on Capital Garage Doors units

Pick the symptom you are seeing to read the likely causes and the fix.

Fix or swap

Keep the Capital Garage Doors going, or retire it?

The same yardstick we use on our own openers. A repair comes first whenever the unit has life left in it.

Worth fixing if…

The fault is a limit setting, a remote, a sensor, a belt or a capacitor — everyday belt-drive opener repairs.
The drive runs cleanly once the door has been re-balanced.
The unit is recent enough that parts are readily available.
You need remotes, a wall button or the app re-paired after a phone or router change, or a replacement remote coded in.

Time to replace if…

The control board has failed and a replacement board is not economic.
The drive has worn through hauling a door that has been out of balance for years.
The opener is underrated for a heavier door it was fitted to.
You want features the current unit cannot provide, such as an opener battery backup.

Choosing the next opener

A new motor is sized to your door: roller, sectional or tilt, and how heavy it is. Most people end up with a belt drive for the quiet running, and most current units can be run from a phone as well as a remote. We take the old motor away.

Before it goes up, the door is balanced by hand. An opener dragging a badly tensioned door burns out early, so the springs get sorted first.

Openers we install

Pricing

What sets the price on a Capital Garage Doors motor job

Capital opener work is priced like any other belt-drive unit: on the fault, not the badge. Coding a remote or re-setting limits is the light end; a belt, capacitor or gear is the middle; a board or a replacement unit is the top. If the door is the underlying cause, that is quoted as door work.

Your quote depends on