Are Centurion garage doors made in Western Australia?

Yes. Centurion Garage Doors is an Australian family-owned manufacturer that has been going since 1976 and builds in WA. That local plant is the reason panel availability on their current ranges tends to be better here than for doors shipped in from interstate or overseas.

Can you match a panel on my TimbaLook door?

Usually, if the range is still in production. The woodgrain finishes are the ones most worth checking in person, because a new section can look slightly fresher than panels that have had several Perth summers on them. We confirm the match and show you the difference before you commit to the order.

Is Centurion the same company as Centurion Systems?

No, and it is a common mix-up. Centurion Garage Doors is the Australian door manufacturer this page is about. Centurion Systems is a separate gate-automation brand, and a remote or receiver for one is not interchangeable with the other. If you are not sure which you have, send a photo of the label and we will tell you.

Do you repair Centurion doors you did not install?

Yes, that is most of what we do. It makes no difference to us who fitted the door or how long ago — we service, repair and replace parts on Centurion doors right across the Perth metro, and we source parts to the correct rating for your specific door.

How often should a Centurion sectional door be serviced?

Once a year is the sensible interval for a door in daily use. A service is mostly balance and lubrication — springs adjusted, rollers and hinges oiled, the opener's force limits re-set — and it is the cheapest thing you can do to keep a spring, a motor and a set of rollers from wearing out early.

Doors by make · Perth

Centurion Garage Doors in Perth — Service, Repairs and New Doors

Made here in WA and fitted on tens of thousands of Perth homes. We service the range, match the panels and hang new ones when the old door has done its time.

Call 0422 828 800 Request Quote

WA-made doors
Sectional & roller
We supply & install
All Perth suburbs

Centurion Garage Doors

Origin: Australia — built in WA
Family-owned since: 1976
Known for: TimbaLook & Cosmopolitan ranges
Door types: Sectional, roller & commercial
What we do: Supply, install, service & repair

New units fitted, old ones fixedMaker’s website

Centurion garage doors are serviced, repaired and supplied new across Perth by our technicians. Because Centurion builds in WA, panels and hardware for the current ranges are usually available quickly, which makes a damaged sectional door far more repairable here than an imported one — we confirm what can be matched before anything is ordered.

Not a Centurion Garage Doors? The full list of door makes we work on around Perth covers the rest. Product details are on Centurion Garage Doors’s own website.

The WA-Built Door You See Everywhere North of the River

Centurion has been family-owned since 1976 and manufactures in Western Australia, which is why the name turns up so often on newer Perth estates — a local factory means shorter lead times for the builders putting up whole streets at once. The Cosmopolitan Colorbond sectional and the TimbaLook woodgrain finishes are the two we see most, usually on double garages in the northern and eastern growth corridors.

Being locally built is a genuine advantage once something goes wrong. A sectional door is only as repairable as its panels are obtainable, and a manufacturer with a WA plant can usually still supply a matching section for a door that has been up for a decade. That is the difference between replacing one dented panel and re-facing a whole door.

The faults themselves are the ordinary ones. Torsion springs lose tension and the door gets heavy; hinges and rollers dry out and the door starts announcing itself at six in the morning; a bottom section takes a knock from a car and the seal stops sitting flat. All of it is day-to-day work, and almost all of it is a repair rather than a replacement.

Jobs we take on

Work we do on Centurion Garage Doors gear

Centurion door repairs

Springs, cables, rollers, hinges and tracks on the sectional and roller ranges, rated for the weight of your door.

Details

Panel replacement

A damaged section matched to the profile and colour of your existing door, ordered from the current range where it still runs.

Details

Annual door service

Balance checked, springs adjusted, rollers and hinges lubricated and the opener's force limits re-set so nothing is straining.

Details

A new Centurion door

Measured and quoted on site across the sectional, roller and woodgrain ranges, fitted with the old door taken away.

Details

Models

Which Centurion Garage Doors have you got?

Match the name on your unit's sticker to one of these cards.

Cosmopolitan Colorbond Sectional

Sectional door

The plain-panel Colorbond sectional garage door on a great many Perth double garages.

TimbaLook Premium Series

Sectional door

Woodgrain finish

The timber-look range — the finish people most often want matched exactly.

Sunshine Series

Sectional door

A lighter, more traditional panel profile seen on older Centurion installs.

Architectural / Urban Series

Sectional door

Flat and slatted designer profiles on newer architect-drawn homes.

Euro 1250

Opener

Centurion's own opener, supplied with its doors — covered on our Centurion motors page.

Faults

Faults we find on Centurion Garage Doors units

Pick the symptom you are seeing to read the likely causes and the fix.

Matching parts

Centurion panels and hardware — what a WA factory means for repairs

The practical benefit of a locally built door is availability. Centurion's current ranges are still in production here, so a single damaged panel on a Cosmopolitan or a TimbaLook door can usually be matched and swapped rather than the whole face being replaced. Older discontinued profiles are a different conversation, and we will be straight about which one you are in before anything is ordered.

Colour is the usual sticking point on the woodgrain finishes, where a new section can read slightly fresher than sun-aged panels around it — a real effect, and one worth seeing on the door before you commit. Springs, rollers, hinges and cables are standard hardware rated to the door's weight. For what a section swap involves, see replacing a single garage door panel; if the door is past sensible repair, compare new garage doors across the makes.

Replacement Centurion Garage Doorssprings, cables and panels are ordered to suit your door’s size and weight.

Pricing

What sets the price on a Centurion Garage Doors door job

Centurion work is priced on what the door needs. A service or a spring adjustment is the light end; a matched panel on a double sectional is the heavy end, and a new door depends on the opening size, the range and the finish you choose. Everything is quoted on site, in writing, before it starts.

Your quote depends on