Are Danmar garage doors made in Perth?

Yes. Danmar is a Perth-owned manufacturer that has been building here for more than 35 years, specialising in timber, aluminium and insulated Thermopanel sectional doors, including side-slide designs for awkward openings.

My timber Danmar door has gone grey. Does it need replacing?

Almost certainly not. Greying is the finish failing under Perth sun, not the door failing, and a timber face that is structurally sound can usually be sanded back and refinished for a fraction of a replacement. What we check is whether the joints are still tight and the panel is not delaminating — that is the line between refinishing and replacing.

Do heavier timber doors wear out springs faster?

They work the springs harder, yes, which is why a yearly balance check earns its keep on a timber or insulated door more than on a light steel one. A heavy door left out of balance drags the opener, wears the rollers, and takes the springs out sooner than it should.

Can you get a replacement panel for a custom Danmar door?

Sometimes, and it depends entirely on the door. Standard range profiles can usually be matched; a genuinely custom face may need to be made to order, with a lead time. We confirm availability before you commit to anything, and we will say plainly when a repair is not realistic.

Do you service Danmar side-slide doors?

Yes. A side-slide door runs its weight along a horizontal track rather than lifting it, so the wear points are the rollers, the track run and the alignment rather than a torsion spring. It is a different service, and one worth having done properly rather than adjusted by guesswork.

Doors by make · Perth

Danmar Garage Doors in Perth — Servicing and Repairs

Perth-owned and Perth-built for more than 35 years, with timber and aluminium faces that need a different kind of care from a plain steel door.

Call 0422 828 800 Request Quote

Perth-made
Timber & aluminium
Hardware & balance
All Perth suburbs

Danmar

Origin: Perth, WA
Building here for: 35+ years
Known for: Timber & aluminium sectionals
Door types: Sectional, side-slide & commercial
What we do: Service, repair & replace

We repair these doors in PerthMaker’s website

Danmar garage doors are serviced and repaired across Perth by our technicians — springs, cables, rollers, hinges and tracks on their sectional and side-slide ranges. Because Danmar builds timber and aluminium faces rather than plain steel, a damaged panel is often a refinishing conversation as much as a replacement one, and we will tell you which applies before anything is ordered.

Not a Danmar? The full list of door makes we work on around Perth covers the rest. Product details are on Danmar’s own website.

A Perth Manufacturer, and a Different Kind of Door

Danmar has been building garage doors in Perth for more than three decades, and its range sits at the design end of the market: natural timber, contemporary aluminium and insulated Thermopanel sectionals, including side-slide doors for openings where a standard lift will not work. You tend to find them on custom homes and renovations rather than on volume estates.

That changes the maintenance picture. A steel door is essentially maintenance-free until something mechanical fails; a timber-faced door has a finish that Perth sun works on year after year. A door that is going grey or lifting at the joints is not a hardware fault at all — and treating it as one is how people end up replacing a perfectly sound door.

Mechanically, though, a Danmar sectional runs on the same principles as any other: torsion springs above the opening, rollers in the tracks, hinges between the sections. Heavier timber and aluminium faces just mean the springs are working harder, which is exactly why they are worth keeping in balance rather than leaving until the door is fighting you. Our garage door spring repair page explains what re-balancing involves.

Jobs we take on

Work we do on Danmar gear

Danmar door repairs

Springs, cables, rollers, hinges and tracks set correctly for the extra weight a timber or aluminium face carries.

Details

Balance & annual service

The service that matters most on a heavy door — springs adjusted, hardware lubricated, opener limits re-set.

Details

Panel & section work

A damaged section assessed honestly: what can be repaired and refinished, and what genuinely needs replacing.

Details

Custom door replacement

If the door is past saving, a custom-faced replacement measured and quoted for the opening you actually have.

Details

Models

Which Danmar have you got?

Match the name on your unit's sticker to one of these cards.

Natural Timber Doors

Sectional door

Real timber faces — the range that most rewards being refinished rather than replaced.

Contemporary Aluminium Doors

Sectional door

Aluminium-faced sectionals, a common choice for custom garage doors on newer architect-drawn Perth homes.

Thermopanels

Insulated sectional

Insulated core

Insulated panels — heavier than they look, and harder on springs.

Side Slide Sectional

Side-sliding door

For openings where a standard lift will not work; the track run is the part that needs care.

Faults

Faults we find on Danmar units

Pick the symptom you are seeing to read the likely causes and the fix.

Matching parts

Danmar panels, finishes and hardware

A Danmar door is a custom product, which cuts both ways. Hardware — springs, rollers, hinges, cables, tracks — is standard and available, and we rate it to the actual weight of your door rather than to a generic sectional, which matters a great deal on a timber or Thermopanel face. That part is straightforward.

The face is where the honest conversation happens. A timber door that has gone grey or is lifting at a joint is often better refinished than replaced, and a single damaged aluminium section on a custom door may need to be made rather than pulled from stock, with the lead time that implies. We will tell you which of those you are looking at, and we would rather send you back to the manufacturer for a matched panel than fit something that does not belong on the door. Our page on garage door panel replacement covers what a section swap involves.

Replacement Danmarsprings, cables and panels are ordered to suit your door’s size and weight.

Pricing

What sets the price on a Danmar door job

Danmar work is priced on the door in front of us. Balance and hardware jobs are the light end and are the same work as on any sectional. Panel and finish work sits at the other end, because a custom face is a custom part — we quote it only once we have confirmed what is actually available.

Your quote depends on