Sectional Garage Doors Made to Fit Your Perth Garage
Panels that lift straight up and tuck under the ceiling. Steel, timber-look or insulated, sized to your opening and paired with an opener.
On this job
Sectional installed
- Fitted in homes across Perth
- Insulated panels available
- Priced before ordering
- Four makes supplied
Quick Answer
A sectional garage door, also called a panel-lift door, is a set of horizontal panels joined by hinges that run up vertical tracks and back along the ceiling. In Perth it is the usual choice for double garages on newer homes, because it seals well, runs quietly and can be insulated. We supply and install sectional doors made by B&D, Gliderol, Steel-Line and Centurion Garage Doors, measured to your opening and priced in writing before we order.
What a sectional door gives a Perth garage
Because every panel is hinged to the next, a sectional door never swings out over the driveway, so you can park right up to it. The door is balanced by springs, usually torsion springs on a shaft above the opening, with extension springs on some older or low-headroom setups, and the opener only guides it. That balance is why a well-set panel-lift feels light when you lift it on the manual release. It does need more headroom than a roller door, and the tracks run back into the garage, so we check ceiling height, downlights and storage shelves before pricing.
Steel panels in Colorbond colours cover most jobs, in flat, ribbed or grooved profiles, and timber-look finishes suit homes where the door takes up half the frontage. For a garage that faces west or doubles as a gym, workshop or games room, insulated garage doors with a foam core keep much of the afternoon heat out and cut the noise from the street. A row of window lites along the top panel lets daylight in without giving up security.
Sectional doors are also the easiest type to keep going. A reversing car or a bin blown over in a storm usually damages one section, and replacing a single dented panel is often possible while that profile is still made. Rollers, hinges, cables and springs wear on a slow, steady schedule, and a yearly check catches most of it early. If you are torn between a panel-lift and a roller curtain, the roller door vs sectional door guide sets out the costs and compromises of each.
Common Problems We Fix
What's Included
- Opening, headroom, side room and track depth measured
- Panel profile, colour, windows and insulation chosen with you
- Torsion or extension springs sized to the finished door's weight
- Old door removed and taken off site
- New tracks, rollers, cables and perimeter seals fitted
- Opener installed and remotes paired, if ordered
- Balance and safety reverse tested before handover
How Our Repair Process Works
Measure the garage
Opening, headroom and anything on the ceiling checked, so the tracks and opener clear it all.
Choose panels and finish
Profile, colour, window row and insulation picked from the maker's current range.
Written price, then order
One itemised price; the door is ordered only once you have agreed to it.
Installation
Old door out, tracks and springs mounted, panels stacked and the opener set up.
Test
Balance, travel limits and safety reverse checked through several full cycles.
Cost Guidance
Sectional door prices move with the width of the opening, the panel type (single-skin steel, timber-look or insulated), any window row, the opener and the headroom setup. A low-headroom track kit or repairs to the opening add to the job. We itemise each part, so you can see what insulation or windows add before you decide. There is no call-out fee, and the price is agreed with you before any work starts.
| Scenario | Guide Price | Notes |
|---|---|---|
| New garage door — standard (supply & install) | $1,300–$5,900 | A standard roller or sectional door, single or double, supplied & installed. The type and size set where it falls in the range. |
| Motor / opener replacement | $580–$1,300 | New opener supplied, installed and programmed. Sectional-door openers sit lower in the range, roller-door openers higher. |
| Sectional door removal & reinstall | Quoted on inspection | Remove and reinstall your sectional door. |
Approximate prices. Typical Perth price ranges, including GST, checked September 2026. A guide only, not a quote — your price is confirmed on site before any work starts. No call-out fee.
Why Choose ABC Garage Door Repairs
Four makes supplied
Sectional doors from B&D, Gliderol, Steel-Line and Centurion Garage Doors, supplied and fitted by us.
Balanced, then tested
Springs matched to the door's weight, and every door tested before we leave, so the opener isn't doing the lifting.
Priced in writing
Door, fitting, opener and removal are itemised before anything is ordered.
Repairs on any make
Springs, cables, rollers and panels on every brand of sectional door. Most repairs are finished the same day.
Related Services
Areas We Service
ABC Garage Door Repairs provides this service across Perth, including:
Don't see your suburb? View all service areas — we still likely cover it.
Request QuoteWhat Perth Homeowners Say
“Very quick and efficient service! When our sectional door spring broke I reached out to ABC Garage Door Repairs and Al replied immediately. Quick and affordable service! Thank you!”
Michal Zak · Spring Repair
“The man came out within 3 hrs on a Sunday of a long weekend. Very punctual, affordable and professional. He did a great job of replacing the springs in my sectional door. I would highly recommend!”
Sarah Nichols · Spring Repair
Frequently Asked Questions
It depends mostly on the width of the opening and the panel you choose. A single-skin steel door in a standard colour sits at the lower end; a double door with timber-look or insulated panels, a window row and an opener costs more. Low headroom, changes to the opening and removal of the old door are listed as separate items. There is no call-out fee, and the price is agreed with you before any work starts.
Sectional doors use a ceiling-mounted opener that pulls the door along a rail. A belt drive runs more quietly than a chain, which matters when there is a bedroom over the garage, and the opener's rating should match the door's size and weight. We supply and fit openers from makes including B&D, Gliderol and Steel-Line, and we repair and service Merlin and most other brands already on Australian garages.
It depends on the garage. A sectional seals better, can be insulated and suits wide openings and a flat panelled look. A roller door costs less, needs far less headroom and keeps the ceiling clear. If the garage is used as living space or faces the afternoon sun, the sectional usually wins; for a simple single garage, the roller often makes more sense.
Often, yes. Each panel hangs on its own hinges, so a single damaged section can be swapped as long as the maker still produces that profile and colour. If the profile has been discontinued, the nearest current panel can sometimes be fitted, and we tell you before ordering whether the difference will show.
No. Torsion springs on a sectional door are wound under heavy load, and adjusting them takes winding bars and a clear sense of how many turns the door needs. A slipped bar or a spring that lets go can cause serious injury. You can safely keep the tracks clean and check the rollers for wear; leave the springs and cables to us.
Fitting a standard double sectional door generally takes part of a day, including removing the old door and setting up the opener. The build time before that depends on the maker, the colour and any insulation, and we confirm the date when the order is placed.
Get a quote
Book Sectional Garage Doors in Perth
Owner-run and based in Perth. Fill in the form with what the door is doing and we will come back with a price, or ring and talk it through.
- 0422 828 800
- , Bennett Springs WA
- Mon–Fri12 AM – 11:59 PMSat–Sun12 AM – 11:59 PM
Request a Quote
Prefer to call? 0422 828 800Ready to upgrade your
garage door experience?
Whether it's an emergency repair in Perth right now or a quote for a new door anywhere in Perth, we've made getting help faster and easier than ever.